Eurol Multisept ISO 220
※ Download: Iso vg 220
In addition to turbine applications, this oil may also be used to lubricate hydraulic systems, compressors, high-speed gears, certain oil lubricated bearings and other applications requiring high quality rust and oxidation inhibited oils which separate readily from water. This classification applies mainly for use with industrial lubrication. The ISO scale is commonly used to measure the viscosity of industrial oils.
This classification applies mainly for use with industrial lubrication. Oil viscosity is measured several ways. It is designed to meet the requirements for accuracy, aqueous separability, and equipment protection of precision machine tools.
Synthetic Gear Oil ISO VG 220 - Consequently it is recommended that before changing a system to one of the Mobilith SHC Series, it should be thoroughly cleaned out to achieve the maximum performance benefits.
These scientifically engineered synthetic lubricants are formulated from synthetic base fluids that have exceptional oxidation and thermal properties and excellent low temperature fluidity. The high viscosity index of these oils deliver less change in viscosity with changes in temperature, enabling wider operating temperature range and improved low temperature startup. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings. Mobil SHC Gear Series products offer outstanding rust and corrosion protection relative to conventional gear oils, even in the presence of seawater contamination. They show no tendency to plug fine filters even when wet and have excellent compatibility with ferrous and non-ferrous metals even at elevated temperatures. Mobil SHC Gear Series also exhibit outstanding compatibility with elastomers in static seal tests. They have outstanding EP properties that provide protection even under shock load conditions. The synthetic base stocks used in Mobil SHC Gear Series oils have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and can help improve gear efficiency. Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. Features and Benefits Mobil SHC Gear Series lubricants are part of the Mobil SHC line of products that are recognized and appreciated around the world for innovation and outstanding performance. These synthetic products, pioneered by our research scientists, symbolize the continuing commitment to using advanced technology to provide lubricants with excellent balanced performance. A key factor in the development of Mobil SHC Gear Series was the close contacts between our scientists and application specialists with key OEMs to ensure that our product offering would provide exceptional performance with rapidly evolving industrial gear designs and operation. Not least among the benefits shown in work with OEMs is the ability to resist micropitting wear which can occur with some highly loaded, case-hardened gearing applications. This cooperative work also demonstrated the all-round balanced performance benefits for the new Mobil SHC Gear technology, including a wide temperature range of application. To address the issue of micropitting wear, our product formulation scientists designed a proprietary combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. The patent-pending combination of synthetic base oils also provides exceptional low temperature fluidity characteristics unmatched by conventional mineral oil gear lubricants and is a key benefit for remote, low ambient temperature applications. The Mobil SHC Gear Series lubricants offer the following potential benefits: Features Advantages and Potential Benefits Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear Helps extend gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature Helps reduce unplanned downtime; less maintenance - especially critical for difficult to access gearboxes. Excellent resistance to degradation at high temperatures Helps extend oil life and drain intervals and reduce oil consumption, which can lower maintenance costs Low traction Helps reduce energy consumption and lower operating temperatures High viscosity index equating to reduced viscosity change with temperature Ability to operate at both high and low temperatures: especially critical in remote applications with no oil cooling or heating Excellent resistance to rust and corrosion and very good demulsibility Helps to ensure smooth, trouble-free operation at high temperatures or in applications subject to water contamination Excellent compatibility with a variety of soft metals Excellent shear stability Helps extend gear and bearing life Resistence to filter plugging, even in the presence of water Fewer filter changes; which can help reduce maintenance costs Excellent seal compatibility Less contamination and lower potential for oil leakage Excellent compatibility with common gearbox materials and with mineral-based gear oils Easy changeover from many mineral products Applications Application Considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC Gear Series exceptional performance, synthetic industrial gear oils are designed to provide optimum equipment protection and oil life even under extreme conditions. They are especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments. Specifications and Approvals Mobil SHC Gear Series 150 220 320 460 680 1000 ISO Viscosity Grade 150 220 320 460 680 1000 Viscosity, ASTM D 445 cSt 40ºC 150 220 320 460 680 1000 cSt 100ºC 22. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment. Exxon Mobil Corporation 22777 Springwoods Village Parkway Spring TX 77389 1-800-ASK MOBIL 275-6624 Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.
In the case of ISO VG 220 oil, those numbers are 198 cSt and 242 cSt, respectively. The oils exhibit excellent lubricity and load-carrying performance contributing significantly to improving the production of quality parts. Mobilith SHC 220 is a supreme performance NLGI Grade 2 multipurpose, heavy duty grease. Nothing in this document is intended to override or supersede the corporate separateness of local entities. For example, ISO VG 22 refers to a viscosity grade of 22 cSt ± 10% at 40°C. Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobilith SHC Series lubricants. Eurol Multisept EP ISO-VG 220 protects metal parts also non-Ferro metals against rust and corrosion, even when water has entered the system. Reduced fluid friction produces lower operating temperatures and can help improve gear efficiency. The second dotted line goes horizontaly through ISO 220, AGMA 5, SAE 50 engineand SAE 90 gear. The Mobil SHC Gear Series lubricants offer the following potential benefits: Features Advantages and Potential Benefits Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear Helps extend gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature Helps reduce unplanned downtime; less maintenance - especially critical for difficult to access gearboxes. They have outstanding EP properties that provide protection even under shock load conditions. Especially formulated to satisfy the demanding requirements of modern high output steam turbines, including gear units. iso vg 220
